[eMule-Web] - eMule 0.30c Pawcio 4.07 [14.11.2003]

[eMule-Web] (http://www.emule-web.de/board/)

- eMule MODs - Allgemein (http://www.emule-web.de/board/emule-mods-allgemein/)

- - eMule 0.30c Pawcio 4.07 [14.11.2003] (http://www.emule-web.de/board/5026-emule-0-30c-pawcio-4-a.html)

Ich finde es sehr schade das er aufhört :cry: :cry: Pawico ist in kurzer zeit zu meinem favoriten mod gewurden. Stimme auch voll zu was xman schrieben hat und finde das Pawico auch tolle Features gebracht hat.

War oder ist auch mein lieblings Mod und jetzt wird es nicht mehr weiter entwickelt weil der Modder aufhört. Alle Mods die bei mir gut laufen werden nicht mehr weiterentwickelt. Erst Tarod dann wird der Gamma nicht mehr weiter entwickelt und jetzt der Pawico. :evil: :evil: :evil:

MadeinChina, Das mit GaMMaOh ist nicht ganz richtig die Weiterentwicklung ist Magic-Elseve Mod

hackersondope2002, ok da haste recht. Aber der Magic-Elseve Mod läuft bei mir überhaupt nicht gut. Deswegen hab ich vom Gamma auf den Pawico gewechselt.

Hi !
Bin seit längerem begeisterter leser dieser foren, habe mich aber heute erst angemeldet weil....ich total bebeistert bin von dem Pawcio-Mod !
habe viele mods ausprobiert, seit der 0.22...eigentlich alle.
Bis her war ich immer von sivka und co begeistert, aber der Pawcio...
mein lieber schwan...
er hat zuerst schwierigkeiten verbindung zu bekommen, braucht da schon ca.5min.
kann mir einer sagen woran das liegt ?
allerdings hat er einen, geht´s auch schon los !
gestern abend drauf gemacht, bis heute abend einmal neu gestartet und er rennt wie die sau !

hier :
eMule v0.30c Pawcio 4.06 Statistics [elgringo]

Transfer
Session UL:DL Ratio: 1 : 2.43
gesamte UL:DL Ratio: 1 : 3.74
Uploads
Session
Hochgeladen: 77.15 MB
Aktive Uploads: 4
Wartende Uploads: 2201
Upload Sessions: 31
Gesamte Uploadmenge: 95.92 MB
Totaler Overhead (Pakete): 6.07 MB (153K)
Gesamt
Downloads
Session
Heruntergeladen: 187.39 MB
beendete Downloads: 0
Aktive Downloads: 30
Gefundene Quellen: 5717
In Warteschleife: 4054
voll: 859
Keine benötigten Teile: 569
Nachfragen: 7
Empfange Hashset: 0
Verbindung wird hergestellt: 146
Verbinde über Server: 0
Zu viele Verbindungen: 7
Verbindung LowID zu LowID unmöglich: 0
problematisch: 0
Gebannt: 43
Andere Datei angefordert: 224
Unbekannt: 1
Download Sessions: 312
erfolgreiche Download Sessions: 293 (93.9%)
fehlgeschlagende Download Sessions: 19 (6.1%)
durchschnittlicher Download pro Session: 655 KB
durchschnittliche Downloadzeit: 3:38 Minuten
durch Komprimierung gewonnen: 164 KB
durch Datenfehler verloren: 0 Bytes
Teile gerettet durch I.C.H: 0
Gesamte Downloadmenge: 212.05 MB
Totaler Overhead (Pakete): 5.00 MB (125K)
Overhead durch Dateianfragen (Pakete): 2.01 MB (82K)
Overhead durch Quellenaustausch (Pakete): 794 KB (1K)
Overhead durch Server (Pakete): 8 KB (77)
Gesamt
Heruntergeladen: 3.63 GB
beendete Downloads: 4
Download Sessions: 3561
durch Komprimierung gewonnen: 6.92 MB
durch Datenfehler verloren: 9.28 MB
Teile gerettet durch I.C.H: 0
Totaler Overhead (Pakete): 55.21 MB (1.51M)
Verbindung
Session
Allgemein
Erneute Serververbindungen: 0
aktive Verbindungen (geschätzt): 370
durchschnittliche Verbindungen (geschätzt): 409
Verbindungsspitze (geschätzt): 518
Verbindungs-Limit erreicht: 0
Upload
Upload-Geschwindigkeit: 12.90 kB/s
Durchschnittl. gesamte Uploadrate: 15.70 kB/s
Durchschnittliche Uploadrate: 12.63 kB/s
max. Uploadrate: 14.10 kB/s
max. durchschnittliche Uploadrate: 12.65 kB/s
Download
Download-Geschwindigkeit: 32.03 kB/s
Durchschnittl. gesamte Downloadrate: 34.71 kB/s
Durchschnittliche Downloadrate: 30.67 kB/s
Max Downloadrate: 54.64 kB/s
Max Downloadrate Durchschnitt: 30.68 kB/s
Gesamt
Zeit Statistiken
letzter Reset der Statistiken: Donnerstag, 13.11.2003, 20:05:56
Zeit seit letztem Reset: 1 Tage 26 Minuten
Session
Gesamt
Abschätzungen
Clients
Warte...
Client-Software
Port
problematisch: 0
Gebannt: 49
Gefiltert: 82
Identifikation (pos : neg): 4818 (84.53%) : 29 (0.51%)
niedrige ID: 490 (8.20%)
bekannte Clients: 5979
Leechers: 28
Server
funktionierende Server: 103
Server mit Login-Fehlversuchen: 116
gelöschte Server: 45
Gesamt: 219
gesamte Benutzeranzahl: 1590651
gesamte Dateianzahl: 117050939
Rekorde
max. funktionierende Server: 151
max. Nutzer Online: 1625213
max. Dateien verfügbar: 117933297
...
geht doch, oder ?
wobei der letzte lsd bei mir kaum mehr als 8 kb zog..

neeeeeein :/

warum muss das immer mir passieren , kaum den mod nen paar freunden empfohlen und den nächsten Versionen entgegengefiebert , schon hört er auf :o

Kenn eigentlich wer den grund das Pawico aufhört ? Bei Maella gab es ja einen grund das er aufgehört hat.

Zitat:

Zitat von Pawcio

eMule Pawcio 4.07a based on 0.30c

This version is based on original eMule

PAWCIO mod WebSite!!! by Rick164:clap:

For a description on "Bandwidth control" tab look below features list.

Version 4.07a

--->Mirror by Anybody
--->Mirror by elbosso
--->Mirror by LD86

Binaries:
1. Normal:
--->Mirror by Rick164
--->eMule 0.30c Pawcio 4.07a
2. P4 optimized (also Celeron with SSE2):
--->Mirror by Rick164
--->eMule 0.30c Pawcio 4.07a P4
3. AMD K7 (Athlon, Duron) optmized:
--->Mirror by Rick164
--->eMule 0.30c Pawcio 4.07a AMD

Sources:
--->Mirror by Rick164
--->eMule 0.30c Pawcio 4.07a Sources

eMule Pawcio 4.07a TestClient based on 0.40f26

This version is only a TestClient, so if there is a new Kademlia version please stop using this mod till update. More info on Kademlia (how to connect and use) can be found on this forum.

--->Mirror by Rick164
--->eMule 0.40f26 Pawcio 4.07a TestClient
--->Mirror by Anybody
--->Mirror by LD86
--->Mirror by tomorrowman
--->Mirror by elbosso

Sources:
--->Mirror by Rick164
--->eMule 0.40f26 Pawcio 4.07a Sources

Features:

1. Pawcio Bandwidth Control (Tag: "Pawcio: BC") - tab "Bandwidht Control" in Preferences.
Completly new upload/download system based on Maella (50 ms, packets splitting), ZZ (USS), and own ideas (DSS, ...) .
-->A. Special algorithm for minimaliziation of opened slots (as an option: can be turn on/off by "Minimize number of opened slots" option)
-->B. Bandwidth Setting in 0.1 kB increaments (Maella idea)
-->C. Simplified options for USS and DSS(now you have to choose only the minimal upload/download and decide how much eMule should use your bandwidth - slider - no more need of % of lowest ping)
-->D. Advanced option for USS and DSS (you can exactly choose what max ping should be and which server to ping)
-->E. Auto managment of Max Connections and Max Connections per 5 second. If you set them too high BC can detect this(auto managment can be turn on/off by Manage of active connections)
Info: BC changes only too high settings (when managment is turned on), if they are resonable, they won't be changed
-->F. Possibility of "catching" whole eMule upstream/downstream within specified limits:
-->--> I: eMule protocol, IP, TCP, UDP header overhead (option "Include Overhead")
-->--> II: TCP connection negotiations (option "Include connections overhead") - empiric calculations
-->--> III: TCP acknowledge packets (option "Include TCP Ack") - empiric (doesn't not take account of RWIN size - only 2.5% of stream)
-->G. Cumulate upload bandwidth to certain slots (as an option - "Cumulate Bandwitdth for upload slots") - idea of ZZ:SlotFocus
-->H. "Session up:down 1:4 limit" from Morph Next.
-->I. Status of USS and DSS (working, preparing, etc) and all limits (up, down) can be seen on Bandwidth Control Tab (you can enter any value in Connection tab but limits of ratio are preserved, you can see them on Status on Bandwidth Control Tab)
-->J. There is new type of clients: Clients on reserved upload list (ready in any time to start upload):
-->--> - when "Minimize number of opened slots" is not selected, reserved client is added when client on upload queue is just ending its session (so reserved client is able to prepare before taking the freed slot - no delays)
-->--> - when "Minimize number of opened slots" is selected, there is quantified number of reserved clients (algorithm in CUploadQueue::AcceptToReserve)
-->--> - when "Cumulate Bandwidth for upload slots" is selected, reserved clients are very similar to Trickle Slots in ZZUL (so there is rotation between upload queue and reserved upload queue)
-->K. Blue lines added to graphs (in Statistic Window) showing whole current upload and download (with whole overhead)

Info:
When "Include connection overhead" is selected you have to set minimum 11kB/s (instead of 10kB/s) for upload limit to have unlimited download, and minimum 3.5 kB/s (instead of 3kB/s) to have 4x ratio.
When "Include TCP Ack" is selected Session up:down ratio (ZZ:RATIO from MorphNext) is forced. All limits you can see on Status - Bandwidth Control.

2. Features for RELEASERS:
- Power Sharing from ZZ (safe MorphKad 0.4 implementation). File in Power Shared mode is automatically uploaded with full chunks, regardless what you set in preference.
- HideOS / Selective Chunk Sharing from SF-IOM mod
- HideOS value and Selective chunk per file basis. Every file can have it's own values (right click on file in Shared Files window), so released files can have HideOS value 1 and Selective Chunk enabled (as Slugfiller recommends) and normal files default value (5)
- Parts Selector - manually choose which parts are Enabled/Disabled (from Plus mod) or Auto managed (Auto means HideOS). Manually enabling/disabling works only for completed files and in power shared mode. Like in HideOS, if you block a part, but user can't take any other, the part is automatically unblocked for this user (so you won't become NSS for him).
- Detail view of parts spreading with double click on file in shared files window

3. Release Window from The Black Hand mod - access to news, releases from eMule!

4. Antivirus Check from The Black Hand mod - scan for viruses just completed files! (configuration in "Extended Settings" in Preferences)

5. Tray menu from eMule Plus mod with fast access to Upload Speed Sense (USS) and Download Speed Sense (DSS) options. (tag Pawcio: TrayMenu)

6. Anti-Leecher and Anti-Credits-Thefs feature from Morph Next mod (Can be enabled/disabled in "Extended settings" in "Preferences")

7. USS and DSS now in Scheduler.

8. Save Upload Queue Waiting Time (SUQWT) by Moonlight.

9. Merge Known - saves statistics also for not completed files (from SF-IOM mod)

10. Check Disk Space - from SF-IOM mod. Files get new stauts, when there is not enough space on disk (Insufficient Diskspace), Can be enabled/disabled in "Extended settings" in "Preferences"

11. Drop High Queue Rate sources - usefull for 56K users (for others rather not because with time flow, queue ranks are decreasing). Drop is done the same way as original clients drops FullQ and NSS (can be enabled/disabled in "Extended settings" in "Preferences")

12. Toolbar from Kademlia client - you can use now skins!

13. New Credits (as an option in "Extended Settings" - "Pawcio Credits"):
- Range from 1.0 to 100.0
- Multiplier of 3 (instead of 2) ---- ratio = 3 * downloaded / uploaded
- For new clients (downloaded and uploaded data less than 1MB) ratio = 3.0 (instead of 1.0)
- If you have recieved more than 1MB from someone but haven't given anything back user gets ratio = 100.0
- Small bonus for clients that have given you many MB:
- if you get 100MB then user recieve ratio = 50.0 till you give back 108MB
- 50MB - ratio = 25.0 - 55MB
- 25MB - ratio = 12.0 - 28MB
- 10MB - ratio = 5.0 - 12MB

14. Mod version (partially form The Black Hand mod) - see what mods are using other users

15. Configuration of MSS in Connection Tab (from Morph Next and LSD mod)

16. Reconnect on LowID in Server Tab (by Tarod) thanks to WiRAHA

17. Code fixes:
- Maella fixes for Sockets
- fix in CUploadQueue::AddClientToQueue()
- fix in CUpDownClient::unzip()
- fix in CUpDownClient::TryToConnect()

Short guide (recommended settings):
USS/DSS Group:
- deselect "Max ping allowed"
- URL to ping - select Auto
- select options: "Minimize number of opened slots", "Cumulate bandiwidth...", "Include overhead", "Manage of active connections", "Include connection overhead".
- use slider (above "Max ping allowed" or on TrayMenu) to find best surfing experience.

Limits in USS group:
1. for T-DSL 768/128 (mostly Germany)
- Min upload - 11
- Max upload - 16
- deselect "Session up:down limit" and "Include TCP Ack packets"

2. for T-DSL 1536/256 (mostly Germany)
Min upload - 14
Max upload - 30
- deselect "Session up:down limit" and "Include TCP Ack packets"

3. for 512/128 (mostly France, Poland)
Min upload - 8
Max upload - 15
- select "Session up:down limit" and "Include TCP Ack packets"

Description of "Bandwidth Control" tab:
USS (Upload Speed Sense) Group:
USS (work of ZZ :respect: ) and DSS dynamically finds current, best upload/downlaod rate from the range of "Min upload/download in kB/s" and "Max upload/download in kB/s". "Max upload/download in kB/s" can be found automatically by selecting "Auto" box. USS/DSS lower the upload/download when other applications are using your connection or when mule is downloading very fast (lowering upload - important for ADSL user when download can be limited by upload). The key of USS/DSS to work is pinging a host. SS can find the proper host to ping for you (just select "Auto" box, on the right of "URL/IP to ping:" input box). If searching fails (very rearly) it uses host given in "URL/IP to ping". If you know which host to ping
unselect "Auto" box and input own address. By pinging, USS/DSS gets replies from host and on this basis it knows what to do (increase or decrease current upload/download). USS/DSS has to have a value to comapre with received respons from host, this value is "Max ping allowed". It would be the best if you could know what is proper ping for your connection (if you know, then select "Max ping allowed" box and input it). If you don't know, do not select "Max ping allowed" box, instead use intuitive slider above (it will find the proper ping for on the base of lowest ping calculated during preparation of USS/DSS). When you move slider on the left upload/download will be lower but you can surf the net easily, on the right - opposite behaviour.

Minimize number of opened slots - when this option is selected eMule will open less slots than original if it is possible (if less users can take more bandwidth). It means that the chunks will arrive faster to users.

Cumulate bandwidth for upload slots (idea of ZZ: Slot Focus - but a bit diffrent) - when this option is not selected eMule tries to upload to all users on upload queue with the same speed. Selecting this option is causing that eMule always upload to one user (Priority client - no matter wheter he has slow or fast connection) and then rest bandwidth gives for the fastest users (faster spread of chunks). Priority client is always client which was first on upload queue (stayed the longest), thanks to this for every client ("fast", "slow") will be a turn to get data.

Session up:down limit (1:4) (idea of ZZ, changed by MorphNext) - instead of 1:3 and 1:4 ratio for download (or unlimited when upload higher than 10) there is limit 1:4 for session. As long as you have downloaded less than 4 times the amount you uploaded (or you are uploading higher than 10kB/s) the limit of download is the same as value entered in "Connection tab" (so it can be unlimited). When you have downloaded more - the download is limited to preserve 1:4 session ratio.

Include overhead - eMule upload not only file data. It comunicates with other users (queue ranks, names of files, hashes, etc), server. If you want this upload/download can be included within limits defined in "Connection" tab or USS/DSS.

Manage of active connection - when this option is selected and you have too high values of "Max connections" and "Max connections per 5 sec for your connection, they will be adjusted automatically when needed.

Include connection overhead - not only eMule communicates between users, system and network layer also (on diffrent level). This system communication can take a lot of bandwidth especially when sorces are loaded (SLS system, or a file with a lot sources from server). It's almost impossible to calculate this overhead exactly, but an approximate is acceptable. You can include this overhead within upload/download limits (USS/DSS or "Connection tab"). Keep in mind that to have the unlimited download or 1:4 ratio with this option selected the limits for upload were chaned:
- unlimited download needs minimum 11kB/s upload instead of 10
- 1:4 ratio needs minimum 3.5 kB/s upload instead of 3

Include TCP Ack Packets - every data received needs to be acknowledged (it is TCP ACK packet), so it's generating upstream. The amount of overhead is hardly to calculate exactly, it depends on many settings (e.g RWIN). But as with "Include connection overhead" some approximation can be done (64kB/s downstream needs circa 1.5kB/s upstream). You can include this overhead within upload limits but then Session up:down limit (1:4) is enforced.

Status Group:
Here you can see what's happening with USS/DSS, what are the limits of download (limited by settings described above - so you don't have to calculate them) and what host is pinged. USS/DSS can be Disabled / Preparing / Succesfull / Failed.

Pawcio 4.07a - 14.11.2003
[FIXED]Wrong wait time when SUQWT is turned on
[UPDATE]IPfilter.dat file (thanks to Meuh6879)

Best Regards,
Pawcio

Man wie soll man da nachkomm mit Versionen testen!!! :evil: :wink: :mrgreen:

MadeinChina, ich verstehe dein prob. bei mir läuft die ur-alt version 4.06
endlich seit knapp 3 tagen ohne probs. möchte ja auch die neue nehmen, ABER
die 4.06 läuft gerade so gut. wenn der mod keine probs macht, so schieben
die modder einfach einen neuen mod raus und wir ärgern uns, weil müssten
ja den esel in den stall schicken.
erst wenn die 4.06 blödsinn macht, kommt der neue dran. *ärgern*

Gucky, also bei mir läuft schon die 4.07 aber erst seit heute morgen! Und ich finde die Modder könnten uns testern 24 Stunden zeit geben :mrgreen: Nein spaß bei seite ist manchmal zu viel zum testen. Muss man halt Priotitäten setzen! :wink:

Zitat:

Zitat von Pawcio

Can you please recomend another dev to continue your work so that others can benefit? I don't know wheter there is someone who will continue my work. For now there is allready mod on this board which has my Bandwidth Control (BC) included: eF-Mod here. It's not updated to the newest version of BC in 4.07 (it's about 4.01) but maybe if you will push eMulefan83, he will update and keep it with newer official eMule version when available.

Zitat:

Zitat von Pawcio

I've got a good news Do you remember great mods of MorTillo? I was talking with him and you will probably very soon see his new mod with Bandwidth control
Now I can't wait to see MorTillo new mod

ja, wäre hilfreich zu wissen, wer der nächste ist :evil:

genug gejammert. es wird zeit, mal das positive bei diesem mod zu sehen.
seit 4 tagen im dauereinsatz und nicht ein abschmierer.

eMule v0.30c Pawcio 4.06 P4 Statistics

Transfer
Session UL:DL Ratio: 1 : 2.10
Cumulative UL:DL Ratio: 1 : 2.14

Upload Sessions: 650
Total successful upload sessions: 552 (84.92%)
Total failed upload sessions: 98 (15.08%)
Average Uploaded Per Session: 5.79 MB
Average upload time: 23:01 Minutes

Download Sessions: 2290
Successful Download Sessions: 1906 (83.2%)
Failed Download Sessions: 384 (16.8%)
Average Downloaded Per Session: 3.51 MB
Average Download Time: 23:43 Minutes

Found Sources: 3823
On Queue: 3609
Queue Full: 131
No needed parts: 26
Asking: 4
Banned: 13
Asked for another file: 815
Unknown: 0

ramverbrauch 116 mb. cpu-last 7-15 %. dropping der highqr/nns funktioniert toll, wie man sieht

so sollte ein mod laufen. sitze vor meinem monitor, bekomme jedesmal
ein grinsen im gesicht, wenn ich ihn in den vollbild (nicht systray) hole und mir seine
daten anschaue. heute habe ich einen dl von max. 84 kb/s gehabt und der
ul ist doch tätsächlich auf 9 runtergegangen. bei einem dl von 10-20 hält er
anständig seine 12 ul. bei werten von 25 steigend und wenn zu einigen
clients connectet wird, geht er schon mal so auf 10, aber ganz selten darunter.
laut overhead-linie wäre noch luft nach oben, aber 13 ul will er nicht bei mir.
jedenfalls errreicht er sie nicht. muss ich halt mit 12 ul leben.
und das übliche, automatik (? vorhanden uss) funktioniert bei mir nicht so gut.
da macht er dann trotzdem zu viele ul-slots auf, trotz häkchen bei :
minimzed number of opened slots und cumulate bandwith for upload slots
nach der zt fängt er innerhalb von 30 min wieder an zu saugen.

sollte also mein rechner und/oder ich nicht explodieren, bleibt er lange am rennen.
trotz neuer version 4.07, die schon darauf geiert, gestartet zu werden.

ps. starte jetzt alle versionen in englisch. bin es leid, immer wieder irgendeine
angepasste deutsch-dll in lang verzeichnis zu kopieren. lang-verz. ist bei mir leer.

Gucky,

recht haste ... ist ein Super - Mod !! Ich nutze davon zwar ne KAD - Version aber auch alles Bestens !!!

wie kommt ihr alle nur an diese traumdaten ran ? Bei mir, egal mit welchem
mod komm ich nicht über eine UL:DL 1,50:1

Was mach ich denn nur falsch :(

nathan,

Code:

 wie kommt ihr alle nur an diese traumdaten ran ? Bei mir, egal mit welchem 

mod komm ich nicht über eine UL:DL 1,50:1 
 

Was mach ich denn nur falsch

Zum Beispiel, posten wir dort unsere Fragen, wo sie hingehören.
D.h. in den Thread, dessen MOD wir benutzen.
Aber was noch wichtiger ist...wir geben genaue Informationen über die verwendeten Einstellungen,
z.B. wieviel Dats wir im Load haben und...und.. :wink:

Januar

@ nathan, der weise (?), der doch nicht alles weiss. *spass*

10 bis 25 files in den dl. hardlimit anpassen, so das 3.500 quellen gefunden werden
dann klappt es auch mit dem dl. aber mindestens 24 std. laufen lassen

Januar1956

Ich hatte zu diesem Zeitpunkt keine Frage gestellt das war nur ein versuch meine verzweiflung auszudrücken.

Wenn ich eine Frage bezüglich den Einstellungen eines Mods habe,
stelle ich sie natürlich in dem jeweiligen Mod-thread und gebe eine detailierte information über meine Einstellungen und meine Verbindung und bitte euch natürlich um eure Hilfe.

Wie zb. Jetzt:

Meine Verbindung: DSL 128/768 (kein Router)
Betriebssytem: Windows XP/Prof.
PIII 933Mhz 768MB Ram und genügend Festplattenkapazität

Mule einstellungen:
Down: 96 Limit 96
Up: 16 Limit 12
Ports: 2552 TCP/2553 UDP
Hardlimit: 500 Max.Verb. 500 MSS: 1408

USS aktiviert :
Min Up 8
Max Up 15

DSS aktiviert:
Min Down 32
Max Down 96
Alle anderen hacken gesetzt ausser max ping allowed

Erweiterte einstellungen:
Drop HQRS : 4000
Overhashes be Chunkwechsel 5
max Verb pro 5: 25
Server Auffrischen : 25
Ansonsten eigentlich alle Hacken gesetzt

Shared Files 24
Downloading 9

ich hoffe das war info genug wenn nicht schreibt einfach welche info Ihr noch benötigt aber bitte befreit mich von diesen miesen downloadraten.

Laufzeit 16:51 Stunden
UL:DL 1.98:1

Ich wär ja mit UL:DL 1:1 auch zufrieden

thx

nathan,
Mit den 8kb bei USS hebst du die 12kb aus den Verbindungseinstellungen auf und kommst so in das Ratio (1:3 b.z.w. 1:4 bei Uploadlimit unter 10kb)

Heilige **** :shock:
Also die v0.30c 4.07a lässt mich auch nicht gerade meckern.

Schon schade um den schönen Mod (endlich mal wieder einer der auch bei mir läuft!), wenn Pawcio nicht mehr weiterentwickelt. Ansonsten läuft hier bei mir
Mod-technisch nämlich nicht viel zusammen, bliebe mir nur wieder die official oder
wildes rumprobieren mit anderen Mods :oops:

Hallöchen,

hab mir jetzt auch mal den neusten Pawico inst. Muss sagen, er rennt :D . Hatte als erstes den original 30c, dann noch einige Mods getestet. Wollten alle nicht richtig rennen. Aber nun, nach 8 Stunden rennt der Pawico ganz gut. Ratio 1.09:1 .

Jetzt noch einmal ne kleine Frage. Wie stellt man am besten uss/dss ein = Habe Arcor DSL 1500. Habe alle Einstellungen auf standart gelassen. Gibt es sonst noch ne Einstellung die ich noch machen sollte ? Ich weiss, es gibt kein Rezept aber evtl. kennt ja jemand ne Einstellung die man nicht vergessen sollte.

MFG

Chris

chris2k, ich habe Arcor DSL 768 und nur USS ein (DSS bringt m.E. nur was, wenn Du nebenbei noch mit anderen Proggies 'runterlädst); Min. UL 8 kb/s; dann unter "Advanced" alle Häckchen gemacht. Habe dann zwar eine 1:4 Beschränkung, die gilt aber für meine gesamte Session und wurde von mir eh noch nie erreicht.

Habe jetzt allerdings den "Not Dead" laufen, da gelten aber dieselben Einstellungen, da beim BWC nichts geändert wurde.

So, nun läuft der Esel seid 23:25.
Habe zur Zeit eine Ratio von 1:1,46.
Von hängern kann ich nicht Berichten.

@Furio
Hab mal deine Einstellungen übernommen. Mal schauen was wird.......

Kurze frage:

Was sollte man bei Einstellungen -> Datei einstellen. Hab alles momentan auf standart.

MFG

Chris[/quote]

chris2k, ist nicht relvant für die Geschwindigkeit und fast alles elbsterklärend. Lies doch mal HIER!

Hier mal meine Werte ;-)

eMule v0.40f.26 Pawcio 4.07 Statistics [DQA321]

Transfer
Session UL:DL Ratio: 1 : 2.22
gesamte UL:DL Ratio: 1 : 2.13

So, mein Mule rockt jetzt seid 1 Tag 23 Stunden ohne Hänger.
Momentan leigt meine Ratio bei 1 : 1,87 gesamt und 1 : 1,88 Session.
Ist echt genial der Mod.

MFG

Chris

Hier meine Stats:

eMule v0.40f.26 Pawcio 4.07 Statistics

Transfer
Session UL:DL Ratio: 1 : 2.49
gesamte UL:DL Ratio: 1 : 2.01

Seit 2 Tagen und 16h

:lol:

Ich geb den Mod so schnell nicht her ;-)

update auf emule0.30d!

Zitat:

Zitat von Pawcio

eMule Pawcio 4.08 based on 0.30d

This version is based on original eMule

PAWCIO mod WebSite!!! by Rick164:clap:

For a description on "Bandwidth control" tab look below features list.

Version 4.08

--->Mirror by Anybody
--->Mirror by elbosso
--->Mirror by LD86

Binaries:
1. Normal:
--->Mirror by Rick164
--->eMule 0.30d Pawcio 4.08
2. P4 optimized (also Celeron with SSE2):
--->Mirror by Rick164
--->eMule 0.30d Pawcio 4.08 P4
3. AMD K7 (Athlon, Duron) optmized:
--->Mirror by Rick164
--->eMule 0.30d Pawcio 4.08 AMD

Sources:
--->Mirror by Rick164
--->eMule 0.30d Pawcio 4.08 Sources

Features:

1. Pawcio Bandwidth Control (Tag: "Pawcio: BC") - tab "Bandwidht Control" in Preferences.
Completly new upload/download system based on Maella (50 ms, packets splitting), ZZ (USS), and own ideas (DSS, ...) .
-->A. Special algorithm for minimaliziation of opened slots (as an option: can be turn on/off by "Minimize number of opened slots" option)
-->B. Bandwidth Setting in 0.1 kB increaments (Maella idea)
-->C. Simplified options for USS and DSS(now you have to choose only the minimal upload/download and decide how much eMule should use your bandwidth - slider - no more need of % of lowest ping)
-->D. Advanced option for USS and DSS (you can exactly choose what max ping should be and which server to ping)
-->E. Auto managment of Max Connections and Max Connections per 5 second. If you set them too high BC can detect this(auto managment can be turn on/off by Manage of active connections)
Info: BC changes only too high settings (when managment is turned on), if they are resonable, they won't be changed
-->F. Possibility of "catching" whole eMule upstream/downstream within specified limits:
-->--> I: eMule protocol, IP, TCP, UDP header overhead (option "Include Overhead")
-->--> II: TCP connection negotiations (option "Include connections overhead") - empiric calculations
-->--> III: TCP acknowledge packets (option "Include TCP Ack") - empiric (doesn't not take account of RWIN size - only 2.5% of stream)
-->G. Cumulate upload bandwidth to certain slots (as an option - "Cumulate Bandwitdth for upload slots") - idea of ZZ:SlotFocus
-->H. "Session up:down 1:4 limit" from Morph Next.
-->I. Status of USS and DSS (working, preparing, etc) and all limits (up, down) can be seen on Bandwidth Control Tab (you can enter any value in Connection tab but limits of ratio are preserved, you can see them on Status on Bandwidth Control Tab)
-->J. There is new type of clients: Clients on reserved upload list (ready in any time to start upload):
-->--> - when "Minimize number of opened slots" is not selected, reserved client is added when client on upload queue is just ending its session (so reserved client is able to prepare before taking the freed slot - no delays)
-->--> - when "Minimize number of opened slots" is selected, there is quantified number of reserved clients (algorithm in CUploadQueue::AcceptToReserve)
-->--> - when "Cumulate Bandwidth for upload slots" is selected, reserved clients are very similar to Trickle Slots in ZZUL (so there is rotation between upload queue and reserved upload queue)
-->K. Blue lines added to graphs (in Statistic Window) showing whole current upload and download (with whole overhead)

Info:
When "Include connection overhead" is selected you have to set minimum 11kB/s (instead of 10kB/s) for upload limit to have unlimited download, and minimum 3.5 kB/s (instead of 3kB/s) to have 4x ratio.
When "Include TCP Ack" is selected Session up:down ratio (ZZ:RATIO from MorphNext) is forced. All limits you can see on Status - Bandwidth Control.

2. Features for RELEASERS:
- Power Sharing from ZZ (safe MorphKad 0.4 implementation). File in Power Shared mode is automatically uploaded with full chunks, regardless what you set in preference.
- HideOS / Selective Chunk Sharing from SF-IOM mod
- HideOS value and Selective chunk per file basis. Every file can have it's own values (right click on file in Shared Files window), so released files can have HideOS value 1 and Selective Chunk enabled (as Slugfiller recommends) and normal files default value (5)
- Parts Selector - manually choose which parts are Enabled/Disabled (from Plus mod) or Auto managed (Auto means HideOS). Manually enabling/disabling works only for completed files and in power shared mode. Like in HideOS, if you block a part, but user can't take any other, the part is automatically unblocked for this user (so you won't become NSS for him).
- Detail view of parts spreading with double click on file in shared files window

3. Release Window from The Black Hand mod - access to news, releases from eMule!

4. Antivirus Check from The Black Hand mod - scan for viruses just completed files! (configuration in "Extended Settings" in Preferences)

5. Tray menu from eMule Plus mod with fast access to Upload Speed Sense (USS) and Download Speed Sense (DSS) options. (tag Pawcio: TrayMenu)

6. Anti-Leecher and Anti-Credits-Thefs feature from Morph Next mod (Can be enabled/disabled in "Extended settings" in "Preferences")

7. USS and DSS now in Scheduler.

8. Save Upload Queue Waiting Time (SUQWT) by Moonlight.

9. Merge Known - saves statistics also for not completed files (from SF-IOM mod)

10. Check Disk Space - from SF-IOM mod. Files get new stauts, when there is not enough space on disk (Insufficient Diskspace), Can be enabled/disabled in "Extended settings" in "Preferences"

11. Drop High Queue Rate sources - usefull for 56K users (for others rather not because with time flow, queue ranks are decreasing). Drop is done the same way as original clients drops FullQ and NSS (can be enabled/disabled in "Extended settings" in "Preferences")

12. Toolbar from Kademlia client - you can use now skins!

13. New Credits (as an option in "Extended Settings" - "Pawcio Credits"):
- Range from 1.0 to 100.0
- Multiplier of 3 (instead of 2) ---- ratio = 3 * downloaded / uploaded
- For new clients (downloaded and uploaded data less than 1MB) ratio = 3.0 (instead of 1.0)
- If you have recieved more than 1MB from someone but haven't given anything back user gets ratio = 100.0
- Small bonus for clients that have given you many MB:
- if you get 100MB then user recieve ratio = 50.0 till you give back 108MB
- 50MB - ratio = 25.0 - 55MB
- 25MB - ratio = 12.0 - 28MB
- 10MB - ratio = 5.0 - 12MB

14. Mod version (partially form The Black Hand mod) - see what mods are using other users

15. Configuration of MSS in Connection Tab (from Morph Next and LSD mod)

16. Reconnect on LowID in Server Tab (by Tarod) thanks to WiRAHA

17. Code fixes:
- Maella fixes for Sockets
- fix in CUploadQueue::AddClientToQueue()
- fix in CUpDownClient::unzip()
- fix in CUpDownClient::TryToConnect()

Short guide (recommended settings):
USS/DSS Group:
- deselect "Max ping allowed"
- URL to ping - select Auto
- select options: "Minimize number of opened slots", "Cumulate bandiwidth...", "Include overhead", "Manage of active connections", "Include connection overhead".
- use slider (above "Max ping allowed" or on TrayMenu) to find best surfing experience.

Limits in USS group:
1. for T-DSL 768/128 (mostly Germany)
- Min upload - 11
- Max upload - 16
- deselect "Session up:down limit" and "Include TCP Ack packets"

2. for T-DSL 1536/256 (mostly Germany)
Min upload - 14
Max upload - 30
- deselect "Session up:down limit" and "Include TCP Ack packets"

3. for 512/128 (mostly France, Poland)
Min upload - 8
Max upload - 15
- select "Session up:down limit" and "Include TCP Ack packets"

Description of "Bandwidth Control" tab:
USS (Upload Speed Sense) Group:
USS (work of ZZ :respect: ) and DSS dynamically finds current, best upload/downlaod rate from the range of "Min upload/download in kB/s" and "Max upload/download in kB/s". "Max upload/download in kB/s" can be found automatically by selecting "Auto" box. USS/DSS lower the upload/download when other applications are using your connection or when mule is downloading very fast (lowering upload - important for ADSL user when download can be limited by upload). The key of USS/DSS to work is pinging a host. SS can find the proper host to ping for you (just select "Auto" box, on the right of "URL/IP to ping:" input box). If searching fails (very rearly) it uses host given in "URL/IP to ping". If you know which host to ping
unselect "Auto" box and input own address. By pinging, USS/DSS gets replies from host and on this basis it knows what to do (increase or decrease current upload/download). USS/DSS has to have a value to comapre with received respons from host, this value is "Max ping allowed". It would be the best if you could know what is proper ping for your connection (if you know, then select "Max ping allowed" box and input it). If you don't know, do not select "Max ping allowed" box, instead use intuitive slider above (it will find the proper ping for on the base of lowest ping calculated during preparation of USS/DSS). When you move slider on the left upload/download will be lower but you can surf the net easily, on the right - opposite behaviour.

Minimize number of opened slots - when this option is selected eMule will open less slots than original if it is possible (if less users can take more bandwidth). It means that the chunks will arrive faster to users.

Cumulate bandwidth for upload slots (idea of ZZ: Slot Focus - but a bit diffrent) - when this option is not selected eMule tries to upload to all users on upload queue with the same speed. Selecting this option is causing that eMule always upload to one user (Priority client - no matter wheter he has slow or fast connection) and then rest bandwidth gives for the fastest users (faster spread of chunks). Priority client is always client which was first on upload queue (stayed the longest), thanks to this for every client ("fast", "slow") will be a turn to get data.

Session up:down limit (1:4) (idea of ZZ, changed by MorphNext) - instead of 1:3 and 1:4 ratio for download (or unlimited when upload higher than 10) there is limit 1:4 for session. As long as you have downloaded less than 4 times the amount you uploaded (or you are uploading higher than 10kB/s) the limit of download is the same as value entered in "Connection tab" (so it can be unlimited). When you have downloaded more - the download is limited to preserve 1:4 session ratio.

Include overhead - eMule upload not only file data. It comunicates with other users (queue ranks, names of files, hashes, etc), server. If you want this upload/download can be included within limits defined in "Connection" tab or USS/DSS.

Manage of active connection - when this option is selected and you have too high values of "Max connections" and "Max connections per 5 sec for your connection, they will be adjusted automatically when needed.

Include connection overhead - not only eMule communicates between users, system and network layer also (on diffrent level). This system communication can take a lot of bandwidth especially when sorces are loaded (SLS system, or a file with a lot sources from server). It's almost impossible to calculate this overhead exactly, but an approximate is acceptable. You can include this overhead within upload/download limits (USS/DSS or "Connection tab"). Keep in mind that to have the unlimited download or 1:4 ratio with this option selected the limits for upload were chaned:
- unlimited download needs minimum 11kB/s upload instead of 10
- 1:4 ratio needs minimum 3.5 kB/s upload instead of 3

Include TCP Ack Packets - every data received needs to be acknowledged (it is TCP ACK packet), so it's generating upstream. The amount of overhead is hardly to calculate exactly, it depends on many settings (e.g RWIN). But as with "Include connection overhead" some approximation can be done (64kB/s downstream needs circa 1.5kB/s upstream). You can include this overhead within upload limits but then Session up:down limit (1:4) is enforced.

Status Group:
Here you can see what's happening with USS/DSS, what are the limits of download (limited by settings described above - so you don't have to calculate them) and what host is pinged. USS/DSS can be Disabled / Preparing / Succesfull / Failed.

Best Regards,
Pawcio

cyrex2001

WOW er macht weiter ? Jubel !!!

4.08

sobald ich aufn server connecte, hab ich ne CPU-auslastung von 90% :shock:

ich versuche schon seit 20 minuten die amd version runterzuladen ! :cry:

ich hab sie.. max DL von 2kb/s mit flashget.. ohne max 700bytes oder so :shock:

oh je 45 Min zum der AMD - Version runterladen ? na dann gehe ich nun erstmal mit den Hund Gassi *gg* , wenn ich reinkomme dürfte es ja fertig sein *gg*

dqa nehme den rick mirror !! da geht es in 1 minute !

Bevor's hier zu Chaotisch wird hab ich 'nen neuen Thread eröffnet, da bestimmt viele Pawcio Fans den neuen direkt antesten werden und garantiert was dazu posten wollen

Neuer Thread zur 4.08

xtremchopper, der eWombat thread ist mittlerweile 79 Seiten lang!
Ein neuer thread sollte also nur aufgemacht werden, wenn ein gravierender Versionswechsel erfolgt. Anhaltspunkt: Zahlenwechsel!
Na ja egal!

@ all: hier bitte nur noch für Pawcio bis 4.07 posten!

Furio,
Sorry, hab's nur gut gemeint :oops: wird nicht wieder vorkommen :mrgreen: